-- *****************************************************************
-- ATM Accounting Information MIB
--
-- Feb 1997, Vasmi Abidi
--
-- Copyright (c) 1996-1997, 1998 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
-- This mib was extracted from an IETF Draft.
-- It currently uses a ciscoExperiment number.--PSIM ATM-ACCOUNTING-INFORMATION-MIB DEFINITIONS ::= BEGINCISCO-ATM-ACCOUNTING-INFORMATION-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,OBJECT-IDENTITY,
Integer32,Counter64FROM SNMPv2-SMI
DisplayString,DateAndTime,TEXTUAL-CONVENTIONFROM SNMPv2-TC
ciscoExperiment FROM CISCO-SMI;atmAccountingInformationMIB MODULE-IDENTITYLAST-UPDATED"9711050000Z"ORGANIZATION"IETF AToM MIB Working Group"CONTACT-INFO"
Keith McCloghrie
Cisco Systems, Inc.
170 West Tasman Drive,
San Jose CA 95134-1706.
Phone: +1 408 526 5260
Email: kzm@cisco.com"DESCRIPTION"The MIB module for identifying items of accounting
information which are applicable to ATM connections."REVISION"9711050000Z"DESCRIPTION"Added objects atmAcctngTransmittedPeakCells and
atmAcctngReceivedPeakCells."::={ ciscoExperiment 18}atmAcctngMIBObjects OBJECTIDENTIFIER::={ atmAccountingInformationMIB 1}AtmAddr::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"The ATM address used by the network entity.
The address types are: no address (0 octets),
E.164 (8 octets), and NSAP (20 octets).
Note: The E.164 address is encoded in BCD
format."SYNTAXOCTETSTRING(SIZE(0|8|20))-- Definitions of objects for use in specifying ATM accounting
-- data to be collectedatmAcctngDataObjects OBJECT-IDENTITYSTATUScurrentDESCRIPTION"This identifier defines a subtree under which various
objects are defined such that a set of objects to be
collected as ATM accounting data can be specified as a
(subtree, list) tuple using this identifier as the subtree."::={ atmAcctngMIBObjects 1}-- Objects defined under the atmAcctngDataObjects subtree
--
-- In each case the semantics of the object are interpreted with
-- respect to the creation/storage of an accounting record for a
-- particular connection on a particular interface.atmAcctngConnectionType OBJECT-TYPESYNTAXINTEGER{ pvc(1),pvp(2),svcIncoming(3),svcOutgoing(4),svpIncoming(5),svpOutgoing(6),spvcInitiator(7),
spvcTarget(8),spvpInitiator(9),spvpTarget(10)}MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The type of connection."::={ atmAcctngDataObjects 1}atmAcctngCastType OBJECT-TYPESYNTAXINTEGER{ p2p(1), p2mp(2)}MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An indication of whether the connection is point-to-point
or point-to-multipoint."::={ atmAcctngDataObjects 2}atmAcctngIfName OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A textual name for the interface on which the data for the
connection was collected. If the local SNMP agent supports
the object ifName, the value of this object must be
identical that of ifName in the conceptual row of the
ifTable corresponding to this interface."::={ atmAcctngDataObjects 3}
atmAcctngIfAlias OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The 'alias' name for the interface as specified by a
network manager, e.g., via a management set operation to
modify the relevant instance of the ifAlias object. Note
that in contrast to ifIndex, ifAlias provides a non-volatile
'handle' for the interface, the value of which is retained
across agent reboots."::={ atmAcctngDataObjects 4}atmAcctngVpi OBJECT-TYPESYNTAXINTEGER(0..4095)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The VPI used for the connection."::={ atmAcctngDataObjects 5}atmAcctngVci OBJECT-TYPESYNTAXINTEGER(0..65535)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The VCI used for the connection."::={ atmAcctngDataObjects 6}atmAcctngCallingParty OBJECT-TYPESYNTAXAtmAddr
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The connection's calling party. If unknown (e.g., for a
PVC), then the value of this object is the zero-length
string."::={ atmAcctngDataObjects 7}atmAcctngCalledParty OBJECT-TYPESYNTAXAtmAddrMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The connection's called party. If unknown (e.g., for a
PVC), then the value of this object is the zero-length
string."::={ atmAcctngDataObjects 8}atmAcctngCallReference OBJECT-TYPESYNTAXOCTETSTRING(SIZE(0..3))MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The connection's call reference value (e.g., from Q.2931).
If unknown (e.g., for a PVC), then the value of this object
is the zero-length string."::={ atmAcctngDataObjects 9}atmAcctngStartTime OBJECT-TYPESYNTAXDateAndTimeMAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"The time when the connection was established."::={ atmAcctngDataObjects 10}atmAcctngCollectionTime OBJECT-TYPESYNTAXDateAndTimeMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The time at which the data in this record was collected."::={ atmAcctngDataObjects 11}atmAcctngCollectMode OBJECT-TYPESYNTAXINTEGER{ onRelease(1),periodically(2),onCommand(3)}MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The reason why this connection data was collected."::={ atmAcctngDataObjects 12}atmAcctngReleaseCause OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"If the connection data was collected because of the release
of an SVC, then this is the cause code in the Release
message for the connection; otherwise, this object has the
value zero."::={ atmAcctngDataObjects 13}atmAcctngServiceCategory OBJECT-TYPESYNTAXINTEGER{ other(1), cbr(2), vbrRt(3), vbrNrt(4),abr(5), ubr(6), unknown(7)}MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The connection's service category."::={ atmAcctngDataObjects 14}atmAcctngTransmittedCells OBJECT-TYPESYNTAXCounter64MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The number of cells, including OAM cells, transmitted by
this switch on this connection."::={ atmAcctngDataObjects 15}atmAcctngTransmittedClp0Cells OBJECT-TYPESYNTAXCounter64MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The number of cells with CLP=0, including OAM cells,
transmitted by this switch on this connection."::={ atmAcctngDataObjects 16}atmAcctngReceivedCells OBJECT-TYPESYNTAXCounter64MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The number of cells, including OAM cells, received by this
switch on this connection."::={ atmAcctngDataObjects 17}atmAcctngReceivedClp0Cells OBJECT-TYPESYNTAXCounter64MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The number of cells with CLP=0, including OAM cells,
received by this switch on this connection."::={ atmAcctngDataObjects 18}atmAcctngTransmitTrafficDescriptorType OBJECT-TYPESYNTAXOBJECTIDENTIFIERMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The traffic descriptor type (as defined in RFC 1695 and its
successors) in the direction in which the switch transmits
cells on the connection."REFERENCE"See atmTrafficDescriptorTypes in ATM-MIB.my in RFC 1695 and
its successors."::={ atmAcctngDataObjects 19}
atmAcctngTransmitTrafficDescriptorParam1 OBJECT-TYPESYNTAXINTEGER(0..2147483647)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The first traffic descriptor parameter in the direction in
which this switch transmits cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngTransmitTrafficDescriptorType."::={ atmAcctngDataObjects 20}atmAcctngTransmitTrafficDescriptorParam2 OBJECT-TYPESYNTAXINTEGER(0..2147483647)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The second traffic descriptor parameter in the direction in
which this switch transmits cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngTransmitTrafficDescriptorType."::={ atmAcctngDataObjects 21}atmAcctngTransmitTrafficDescriptorParam3 OBJECT-TYPESYNTAXINTEGER(0..2147483647)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The third traffic descriptor parameter in the direction in
which this switch transmits cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngTransmitTrafficDescriptorType."::={ atmAcctngDataObjects 22}atmAcctngTransmitTrafficDescriptorParam4 OBJECT-TYPESYNTAXINTEGER(0..2147483647)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The fourth traffic descriptor parameter in the direction in
which this switch transmits cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngTransmitTrafficDescriptorType."::={ atmAcctngDataObjects 23}atmAcctngTransmitTrafficDescriptorParam5 OBJECT-TYPESYNTAXINTEGER(0..2147483647)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The fifth traffic descriptor parameter in the direction in
which this switch transmits cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngTransmitTrafficDescriptorType."::={ atmAcctngDataObjects 24}atmAcctngReceiveTrafficDescriptorType OBJECT-TYPESYNTAXOBJECTIDENTIFIER
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The traffic descriptor type (as defined in RFC 1695 and its
successors) in the direction in which this switch receives
cells on this connection."REFERENCE"See atmTrafficDescriptorTypes in ATM-MIB.my in RFC 1695 and
its successors."::={ atmAcctngDataObjects 25}atmAcctngReceiveTrafficDescriptorParam1 OBJECT-TYPESYNTAXINTEGER(0..2147483647)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The first traffic descriptor parameter in the direction in
which this switch receives cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngReceiveTrafficDescriptorType."::={ atmAcctngDataObjects 26}atmAcctngReceiveTrafficDescriptorParam2 OBJECT-TYPESYNTAXINTEGER(0..2147483647)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The second traffic descriptor parameter in the direction in
which this switch receives cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngReceiveTrafficDescriptorType."::={ atmAcctngDataObjects 27}atmAcctngReceiveTrafficDescriptorParam3 OBJECT-TYPESYNTAXINTEGER(0..2147483647)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The third traffic descriptor parameter in the direction in
which this switch receives cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngReceiveTrafficDescriptorType."::={ atmAcctngDataObjects 28}atmAcctngReceiveTrafficDescriptorParam4 OBJECT-TYPESYNTAXINTEGER(0..2147483647)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The fourth traffic descriptor parameter in the direction in
which this switch receives cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngReceiveTrafficDescriptorType."::={ atmAcctngDataObjects 29}atmAcctngReceiveTrafficDescriptorParam5 OBJECT-TYPESYNTAXINTEGER(0..2147483647)MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"The fifth traffic descriptor parameter in the direction in
which this switch receives cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngReceiveTrafficDescriptorType."::={ atmAcctngDataObjects 30}atmAcctngCallingPartySubAddress OBJECT-TYPESYNTAXAtmAddrMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The connection's calling party sub-address. If the
connection has no calling party sub-address, or it's value
is unknown, then the value of this object is the zero-length
string."::={ atmAcctngDataObjects 31}atmAcctngCalledPartySubAddress OBJECT-TYPESYNTAXAtmAddrMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The connection's called party sub-address. If the
connection has no called party sub-address, or it's value is
unknown, then the value of this object is the zero-length
string."::={ atmAcctngDataObjects 32}atmAcctngRecordCrc16 OBJECT-TYPESYNTAXOCTETSTRING(SIZE(2))MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"The value of the CRC-16 checksum (as defined by ISO 3309
(HDLC) and/or ITU X.25) calculated over the accounting
record containing this object.
While the mechanism for calculating/encoding the checksum
value is specific to the method of encoding the accounting
record, an accounting record containing this object is
typically generated by initializing the value of this object
to the all-zeros string ('0000'H), with the location of
these zeros being saved. After generating the record, the
checksum is calculated over the whole connection record and
then the all-zeros value is overwritten (at the saved
location) by the calculated value of the checksum."::={ atmAcctngDataObjects 33}atmAcctngTransmittedPeakCells OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The number of cells transmitted on the connection within
the peak 5-second sub-interval, where the peak sub-interval
is the one having the highest value of any sub-interval in
the current/completing accounting period. One accounting
period ends and the next starts at the time of each
'periodic' collection of accounting information. A value
of '-1' indicates that no peak value is available."::={ atmAcctngDataObjects 34}atmAcctngReceivedPeakCells OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"The number of cells received on the connection within
the peak 5-second sub-interval, where the peak sub-interval
is the one having the highest value of any sub-interval in
the current/completing accounting period. One accounting
period ends and the next starts at the time of each
'periodic' collection of accounting information. A value
of '-1' indicates that no peak value is available."::={ atmAcctngDataObjects 35}END